Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: thecameraman on June 28, 2008, 04:18:14 PM
-
Please help
I am trying to run a 12 v windshield wiper moter with a PS2 controller as an input device
I have the ps2 controller hooked up to a “ http://www.cheapcontrolsystems.com” board .
When I hook up servos (futaba s148) this board operates fine
I have a “scorpion xl board” hooked to a 12v motor when I use a servo tester (Astro 105 servo tester “www. Astroflight.com”) to the scorpion board it runs the motor just fine
When I plug the “scorpion xl board” to the “cheapcontrolsystems board “ NOTHING HAPPENS.
The separate boards operate just fine independently but together they don’t seem to communicate…why???? What can I do???
John Lazear
[email protected]
SYSTEM
http://www.cheapcontrolsystems.com
scorpion xl “www.robotpower.com”
ps2 controller
12v battery
6v battery
Windshield wiper motor
FOR TESTING
Servo futaba s148
Astro 105 servo tester “www. Astroflight.com
-
Im not entirely clear on what you are trying to do . . .
PS2 controller -> cheapcontrolsystems servo controller -> scorpion XL -> DC motor
is that right? conceptually it seems it will work . . . get out a multimeter and measure voltages at all the pins. also, use the frequency function and measure the pins that recieve a servo signal.
let us know what you determine . . .
for reference
http://www.robotpower.com/products/scorpion_XL_info.html