Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: cyclopediatechtilon on December 07, 2008, 10:31:12 AM

Title: Grid board problem
Post by: cyclopediatechtilon on December 07, 2008, 10:31:12 AM

Ok. i got a grid-style pc board and everyting from the stores here. the problem is that the male header pins are not fitting in the small holes.

Title: Re: Grid board problem
Post by: Admin on December 10, 2008, 03:48:37 AM

Are the holes too small, or the spacing is off?

If they are just too small, you can get a razor blade and 'drill' them open a bit. Otherwise you need to shop for a new pc board ;D

Title: Re: Grid board problem
Post by: cyclopediatechtilon on December 10, 2008, 07:11:32 AM

Thx i managed to fit the stuff 8)8)