Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: goatfish on June 28, 2008, 11:15:38 PM
-
could someone please turn this isnt a PCB board,or if you know of a FREE program to do it myself,thanks (http://www.olimex.com/dev/images/avr-pg1b-sch.gif) also here is the link if you cant see the image too well http://www.olimex.com/dev/images/avr-pg1b-sch.gif (http://www.olimex.com/dev/images/avr-pg1b-sch.gif)
-
doesnt them fine cad systems have a feature that fix that for you?
-
i dont know ,but i dont have CAD
-
could someone please turn this isnt a PCB board,or if you know of a FREE program to do it myself,thanks
It might help if we knew what the hell you were asking...
If you are looking for a program to create scematics and make PCB's try EAGLE.
doesnt them fine cad systems have a feature that fix that for you?
haha, right? when did they stop teaching basic grammer in school?
-
http://corcaighist.blogspot.com/2008/04/we-need-grammar-back-in-school.html
they already have.
-
this is the schematic for the cable used to program the $50 robot,i need to know of a program that i can put the schematic into and it will turn it into a PCB board for me and i didnt know Eagle could make pcb's from schematics
-
It sure does. Download the freeware version, and take the time to go through the tutorial that they give you. If you just jump right into it you will miss a lot of the cool features they include, and it will save you time in the long run. I just finished my first board with it, and I love it... except I cant seem to get the gerber viewer I am using to accept the drill files, so I am a little nervous about sending it out to get fabbed.
-
i didnt know Eagle could make pcb's from schematics
I used Eagle to design the Axon ;D