Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: goatfish on March 05, 2008, 09:53:00 PM

Title: $50 robot servos and the .hex file
Post by: goatfish on March 05, 2008, 09:53:00 PM

ok so i have just recieved my servos in the mail(hs-322 hd),and after reading the modifying tutorial,i was wondering,do you need to have the robot brains made first,so that you can upload the .hex file to it?
do you also need the prgrams like winavr and the other ones to do it?
 ???

Title: Re: $50 robot servos and the .hex file
Post by: ed1380 on March 05, 2008, 10:51:50 PM

yes. the controller board has to be made and programmed with win avr/avr studio/pony prog.  or do this http://www.instructables.com/id/modify-the-hitec-hs-325-servo-for-continuous-rotat/

Title: Re: $50 robot servos and the .hex file
Post by: benji on March 06, 2008, 11:55:41 AM

what are you going to do with these servos?

Title: Re: $50 robot servos and the .hex file
Post by: goatfish on March 06, 2008, 09:29:32 PM

well i plan to use the servos for the $50 robot ;D