Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: vishalsaxena on June 12, 2008, 02:08:57 AM
-
Hey people I want basic knowlege of electronics specially.....AVR ATmega8
first I thought of reading its datasheet.........but its little too much.........
To tell you I dunn have any knowlege of digital and analog circuits......
bcoz Ive just passed my 1st year of B.E.(Hons).....
Please help
Thank you
Vishal Saxena
-
gotta tell ya to google it would give ya many tutroials
try "AVR tutorial"
the datasheet is to check what properties that mcu has
-
I learned it by playing around with PonyProg lock bits, and by playing around with the registers and such in AVR Studio, and reading the datasheet, and ask questions on this forum and on the AVR Freaks forum.
-
Thanx alot benji and pomprocker..........[:D]
-
It will takes years (not hours or days) to really understand a microcontroller. There is still quite a lot that I myself still do not understand . . .
My recommendation is start a project, then just learn what you *need* to know. My $50 Robot will get you started on the very basics . . .
-
Thanx Admin............Yeah I already started it...........Just that I need to find a good
AVR STK serial/ ISP2 programmer...........
Ive already built MCU....... nd hv debugged it...........
nd I was seeking knowledge so that next time I can build my own MCU
without Blindly following a tutorial.........[:D]