Author Topic: Linear Actuators?  (Read 4190 times)

0 Members and 1 Guest are viewing this topic.

Offline NyxTopic starter

  • Robot Overlord
  • ****
  • Posts: 204
  • Helpful? 0
Linear Actuators?
« on: August 24, 2007, 08:39:11 PM »
Anyone knows a place that sells 12V electric linear actuators for non-insane prices? I would like something not too large (8" or less in length) for the arms of my robot.
Logged

Offline Tsukubadaisei

  • Robot Overlord
  • ****
  • Posts: 293
  • Helpful? 0
Re: Linear Actuators?
« Reply #1 on: August 25, 2007, 06:56:59 PM »
I don't know. They are out of my "jurisdiction". But as far as I know I think you are suppose to build them. they are nothing but a normal motor+gear/wormgear+rail. Maybe if you search only for the "rail"(I don't know the real name) then you might find cheaper alternatives.
Logged
A.I.(yes those are my initials)

paulstreats

  • Guest
Re: Linear Actuators?
« Reply #2 on: August 25, 2007, 07:14:52 PM »
I once needed a 12v push solenoid, to build my own remote operated lock, but it cost about GB?14 which i thought was very expensive and the rod only "pushed" out of the housing about 50mm. Until the price comes down and they offer a greater degree of motion i wouldnt recommend them... 
Logged

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Linear Actuators?
« Reply #3 on: September 29, 2007, 03:58:17 PM »
Logged

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: Linear Actuators?
« Reply #4 on: October 01, 2007, 06:05:56 PM »
door lock actuators by allelectronics.com for 6 bucks. But very little push/pull
Logged
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline neopj3

  • Jr. Member
  • **
  • Posts: 15
  • Helpful? 0
Re: Linear Actuators?
« Reply #5 on: December 03, 2007, 12:25:05 PM »
you could also make your own using thread all or a long machine screw and nut.  kinda like a garage door opener.
Logged
 

data_list