Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: drofan on January 21, 2013, 03:33:07 AM
-
Hi all,
We are Elecrow, which located in ShenZhen, China. We supply competitive prototype Fusion PCB service. Now, You don't need pay extra fees for your PCB's color any more! There are 6 colors for select - Green, Red, Blue, Yellow, White, Black, all colors are free! You can select the color you like and make your design more sexy. Besides, all boards are 100%E-Test, of course, this is also free.
We supply:
- 2 Layer 10 * 10cm Max with 10pcs.
- 2 Layer 20 * 20cm Max - 5/10pcs (Color Free). In here, the price of 5pcs absolute will make you surprised.
- 2 Layer 20cm * 20cm Max - 50pcs (Color Free).
(http://www.elecrow.com/extent images/Our PCB Boards.JPG)
(http://www.elecrow.com/extent images/Elecrow Hasl Suface Finish.jpg)
PCB with Hasl Suface Finish
(http://www.elecrow.com/extent images/Elecrow ENIG Suface Finish.jpg)
PCB with ENIG Suface Finish
Here are the prices for usual dimensions, all prices are base on 2 layer, 1.6mm thickness, Hasl surface finish, and 100% E-Test, colors are free.
5 * 5cm 10pcs $9.9
5 * 10cm 10pcs $23.9 weight + 60g
10 * 10cm 10pcs $23.9 weight + 100g
5 * 15cm 5pcs $29.4, If your boards are used as prototype, we recommend you select 5pcs, not only for environmental protection but also it will cheaper a lot than 10pcs.
5 * 20cm 5pcs $37.9
10 * 15cm 5pcs $42.9
5 * 5cm 50pcs $37.9
5 * 10cm 50pcs $69.9
10 * 10cm 50pcs $101.9
We supply world wide shipping, the turn around time is 7-10days(For DHL) or 15-25days(For Airmail). Another good news is we supply free shipping for order over $50. For more detail please visit Elecrow - Fusion PCB Service (http://www.elecrow.com/services-c-73/fusion-pcb-service-c-73_116/).
-
This sounds almost exactly like the service provided by seeedstudio and iteadstudio. The pricing is the same, even. I bet they all use the same PCB board fab.
If they do, then the board quality is OK for hobbyist boards and larger pitches and larger holes, but I wouldn't use it for a fine-pitch precision job. They may say they do 8 mil or 10 mil, but I wouldn't rely on that -- 12 mil and up might be fine. For finer pitches, I'd go with oshpark.com instead, which gives you fewer boards, and a slightly higher price, but much higher quality. (Also, you cannot choose your color at OSH Park. Oh, well :-)
-
Might have to try you guys for some boards. Anyone ever used them before?
-
Might have to try you guys for some boards.
Welcome!, we will give you the best service!