Author Topic: programming atmega16  (Read 3484 times)

0 Members and 1 Guest are viewing this topic.

Offline darkjungleTopic starter

  • Jr. Member
  • **
  • Posts: 11
  • Helpful? 0
programming atmega16
« on: August 29, 2007, 11:51:28 AM »
how to programme the $50 robot if im using atmega16

Offline snow

  • Full Member
  • ***
  • Posts: 73
  • Helpful? 0
Re: programming atmega16
« Reply #1 on: August 29, 2007, 01:02:45 PM »
programmer: STK200:
Code: [Select]
http://www.lancos.com/prog.html#avrisp
software: ic-prog or avrdude(+gui)

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: programming atmega16
« Reply #2 on: August 29, 2007, 04:33:06 PM »
This shows you what to do for the $50 robot using the ATmega168. The same basics apply as here:
http://www.societyofrobots.com/step_by_step_atmega168_swapout.shtml

The pins are different, with a small change in the makefile, but otherwise its the same.

 


Get Your Ad Here

data_list