go away spammer

Author Topic: ATMEGA32V & ATMEGA32L  (Read 1632 times)

0 Members and 1 Guest are viewing this topic.

Offline w_bwrTopic starter

  • Jr. Member
  • **
  • Posts: 18
  • Helpful? 0
ATMEGA32V & ATMEGA32L
« on: June 30, 2010, 02:59:03 PM »
can anyone tell what is the difference between the both _ the ATmega32V & ATmega32L?
Logged

Offline TrickyNekro

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 1,208
  • Helpful? 15
  • Hardware and Firmware Designer
    • The Hellinic Robots Portal
Re: ATMEGA32V & ATMEGA32L
« Reply #1 on: June 30, 2010, 03:13:36 PM »
Atmega32V must be the drop in replacement for the (L)

I can't find it here....

http://www.atmel.com/dyn/products/devices.asp?family_id=607
Logged
For whom the interrupts toll...

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: ATMEGA32V & ATMEGA32L
« Reply #2 on: June 30, 2010, 08:51:25 PM »
Hi,

Not that I know, but is there a chance that the "L" stand for Low Power (it does in PICs).


Edit:
Yes, it seems so
http://www.atmel.com/dyn/products/product_card_v2.asp?part_id=4592
« Last Edit: June 30, 2010, 08:58:47 PM by Soeren »
Logged
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: ATMEGA32V & ATMEGA32L
« Reply #3 on: June 30, 2010, 08:58:11 PM »
Yep, Normally it just means lower power and lower clock frequency range. Say instead of 0-20mhz it would be 0-16mhz or 0-8mhz.
Logged
Howdy

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: ATMEGA32V & ATMEGA32L
« Reply #4 on: June 30, 2010, 09:00:53 PM »
Hi,

I don't know the specs on the "V", but the "L" sais 64 MIPS!
Logged
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives
 

Get Your Ad Here