Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: BANE on February 27, 2011, 04:14:39 PM
-
Hello all,
It turns out i accidently hooked up my N channel mosfet from radio shack wrong and now it is stuck open. is it possible to un stick it or is it junk?
thanks
-
Hi,
It's toast.
-
It's toast.
as i feared :'(.........good thing im passing by radio shack tomorrow
-
Yes, you probably got either the gate-drain or the drain-source welded together internally.
A large-ish current through it might reveal which, by the voltage drop over it - drain-source welded would give a ~0V drop, gate-drain would have a slightly higher drop (but you may need to compare it with a good one by connecting the gate and drain).