Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: hate_forever143 on February 16, 2008, 11:04:46 AM
-
i have made the $40 robot to follow a white line. the probllem is the motors do not start at all even though i have given proper connections. as soon as i supply power all the leds start glowing but the motor does not start. what may be the problem..?
-
have you checked your pin connections?
-
yes i have checked all my pin connections and everything seems fine
-
If everything seems fine, then it is working, right? ;)
Make sure you check all the pins everywhere!
Is your battery fully charged?
-
This may be too simple an answer, but are you sure the motor works?