Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: sancharsharma on December 07, 2012, 12:59:02 AM

Title: Head Detection
Post by: sancharsharma on December 07, 2012, 12:59:02 AM: Hi,

I have a project in which I have to know if a person is wearing a cap (the cap could be covered like helmet if required).
We started with using light sensors to check if the cap is occupied. However, it is very easy to bluff it by filling it with anything.
So, we need a sensor that can detect if there is a human head inside or not.

I searched for sensors to sense breath but they require huge processing.
We don't have the budget to carry out huge processing or to use a camera.

Any help would be appreciated.

Thank you.
Title: Re: Head Detection
Post by: jwatte on December 07, 2012, 07:16:43 PM: The head is pretty warm, so a temperature sensor on the inside of the cap might work.

It can still be spoofed by putting the cap in an oven or something, but if you don't have a big budget, then you probably can't afford a perfect system.
Title: Re: Head Detection
Post by: Soeren on December 08, 2012, 10:16:51 PM: Hi,

Quote from: sancharsharma on December 07, 2012, 12:59:02 AM
I have a project in which I have to know if a person is wearing a cap (the cap could be covered like helmet if required).
We started with using light sensors to check if the cap is occupied. However, it is very easy to bluff it by filling it with anything.
Why would anyone try to fool a cap?
And if there's a living person involved, wouldn't it be easy to check if the cap is running around without a person in it? ;D

I think you have to reveal a little more detail, because it sounds a little absurd (no offense meant).

You can fool any cap (they're not very smart), but you can make it harder by combining a couple of detectors. Temperature have already been mentioned and anything outside a narrow band, say +/-5°C (with the center depending on ambient temperatures), would mean no human involved.
Adding a pressure switch in the sweatband would tell whether the cap is filled, but a small head may go undetected.

More info fom you may lead to more ideas! :)

Quote from: sancharsharma on December 07, 2012, 12:59:02 AM
So, we need a sensor that can detect if there is a human head inside or not.
That does not sound scary ;)
Title: Re: Head Detection
Post by: MrWizard on December 09, 2012, 05:05:24 AM: What if its a dead head ??? ? why not use a ir or reflection detector, perhaps a physical switch ?