Don't ad-block us - support your favorite websites. We have safe, unobstrusive, robotics related ads that you actually want to see - see here for more.
0 Members and 1 Guest are viewing this topic.
it was just a human-keyboard-interface error.
Not sure if this is related, but when I programmed PICAXE microcontrollers, you couldn't use a USB to serial cable since the serial used some special commands that couldn't be decoded by the converter.
hi I am starting of with this 50$ robot ,i am a beginner need your help with the parts things,I need to know the parts numbers ,like resistor ,capacitor values ,micro controller number and other stuff values used in this robot as you have already made this ,because the electronic shopkeer is asking thesew values from me .please help thanks regardsjunaid[email protected]
I think that the programmer is my problem or more specifically, I don't which wire goes to which hole. I will post a diagram and I'll see if someone can fill it in for me:As you can probably tell, the red line marks the first hole.
Quote from: junaidp on January 24, 2010, 12:28:38 PMhi I am starting of with this 50$ robot ,i am a beginner need your help with the parts things,I need to know the parts numbers ,like resistor ,capacitor values ,micro controller number and other stuff values used in this robot as you have already made this ,because the electronic shopkeer is asking thesew values from me .please help thanks regardsjunaid[email protected]It is pretty easy to look at the part numbers on the tutorial (at the bottom of this page: http://www.societyofrobots.com/step_by_step_robot_step1.shtml) and then look them up online. When you find them online the description on the website you find them on usually has the values.
hey thanks alot for this info,its really work,but the photoresistor value not mentioned here if u know please do let me know.. secondly i wanna know whats the diff between a servo and a simple motor,can i use a motor for this.and if i want to use a sensor will it be a must to use a complete circuit,can i use a sensor (like a robot will move left if an obstacle is there) without using this complete sensor.my location is islamabad pakistan .thanksQuote from: shaduwz on January 24, 2010, 12:57:54 PMQuote from: junaidp on January 24, 2010, 12:28:38 PMhi I am starting of with this 50$ robot ,i am a beginner need your help with the parts things,I need to know the parts numbers ,like resistor ,capacitor values ,micro controller number and other stuff values used in this robot as you have already made this ,because the electronic shopkeer is asking thesew values from me .please help thanks regardsjunaid[email protected]It is pretty easy to look at the part numbers on the tutorial (at the bottom of this page: http://www.societyofrobots.com/step_by_step_robot_step1.shtml) and then look them up online. When you find them online the description on the website you find them on usually has the values.