Society of Robots - Robot Forum
General Misc => Misc => Topic started by: Rmelnikas on March 13, 2009, 03:12:25 AM
-
Hi i am looking to build the $50 robot im 15,
i live in australia and have been looking for the parts on the sheet there all in the US ive been looking for the last 3 days where i can buy but had no luck i've looked on Dicksmith and Jaycar but there are many different versions and i don't which one to choose.
If someone has the exact part or can give me product codes, for there items??
I Know this has been in other topics but could i not just be sent to another link.
I want to start building but dont want to spend $100's on parts and delivery from the US.
I really would appreciate if i could get some help. ??? ???
Thanks,
Rmelnikas
-
hey there bud and welcome to the forums ;D great to see another aussie on here! anyway about the parts you can get almost everything at www.futurlec.com.au (http://) +$4.00 shipping ;) well everything but the servos, you can find some servos on ebay from those hong kong companies for about $10-$25 each. when on futurlec they do have the atmega8 but make sure you select the 18 pin version, they also have the 32 pin so be careful!
i wish you the best of luck with your project and if you have any questions feel free to ask we dont bite! :D
-
I would really rather a Store like dicksmith as you can complain in person if u have to i would order from them but there are so many different types and i don't know how to tell difference
Thanks,
Rmelnikas
-
but there is the fact that futurlec knocked almost half the price off my $50 order compared to dicksmith/jaycar! you can pick up the odd little thing at dicksmith like header pins (if you really wanted too) but ive never had any problems with futurlec the last 2-3yrs ive purchased from them. i would really suggest buying from them! and if you really wanted me to i could knock up a part number list for you :)
-
If you could knock up a part list that would be great cause i don't know the difference if i see some of the same parts.
Id really appreciate it.
Thanks,
Rmelnikas.
-
gah! all came to about $15.00
ATMEGA8-16PC ATMega8 28-Pin 16MHz 8kb 8-bit Microcontroller
C220U10E 220uF 10V Radial Electrolytic Capacitor
C100UC 0.1uF 50V Ceramic Capacitors
7805T 7805T - 5V 1A Positive Regulator (LM7805)
ICS28NMT 28 Pin Narrow Machine Tooled IC Socket
HEADS10 10 Pin .100 Straight Male Headers
LED5R Red 5mm Round LED
R0015K14W 1.5kohm 1/4W 5% Carbon Film Resistor
R330R14W 330ohm 1/4W 5% Carbon Film Resistor
PHOTOCELL10 photocell 5-1000k
EXPBRD small experimenters board
okay so the resistor values are a bit off but the closest futurlec had. same goes with the photocells, i dont really know what resistance they need? but make sure when you enter this into the site you put the right quantity!!
but dont be afraid to purchase more than you need (unless your teh solderin gawd!) nothing frustrates me more than buying components then soldering one on wrong and then waiting like 3-5 days for the new part to arrive.
(if you screw one part up with no spares geting one from dse or jaycar saves you $4.00 shipping!)
anyway, if you have any questions just ask!
-
Hey thanks for that ill try and get them.
One other thing do u know where i can get an AVR STK Serial Port Dongle Programer.
Thanks,
Rmelnikas
-
yea, thats the one thing thats cost a bit for this project.
you can take a look at these:
http://cgi.ebay.com.au/USBasp-USB-Powered-ATMEL-AVR-ATMEGA-ISP-Programmer_W0QQitemZ400035380440QQcmdZViewItemQQptZLH_DefaultDomain_15?hash=item400035380440&_trksid=p3286.c0.m14&_trkparms=66%3A2 (http://cgi.ebay.com.au/USBasp-USB-Powered-ATMEL-AVR-ATMEGA-ISP-Programmer_W0QQitemZ400035380440QQcmdZViewItemQQptZLH_DefaultDomain_15?hash=item400035380440&_trksid=p3286.c0.m14&_trkparms=66%3A2)|65%3A1|39%3A1|240%3A1318
http://cgi.ebay.com.au/USB-ATMEL-AVR-ISP-Programmer-For-AVR-Studio-4_W0QQitemZ350176986516QQcmdZViewItemQQptZAU_B_I_Electrical_Test_Equipment?hash=item350176986516&_trksid=p3286.c0.m14&_trkparms=66%3A2 (http://cgi.ebay.com.au/USB-ATMEL-AVR-ISP-Programmer-For-AVR-Studio-4_W0QQitemZ350176986516QQcmdZViewItemQQptZAU_B_I_Electrical_Test_Equipment?hash=item350176986516&_trksid=p3286.c0.m14&_trkparms=66%3A2)|65%3A1|39%3A1|240%3A1318
http://cgi.ebay.com.au/USB-ISP-Programmer-for-ATMEL-AVR-ATMega-ATTiny_W0QQitemZ160317691121QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item160317691121&_trksid=p3286.c0.m14&_trkparms=66%3A2 (http://cgi.ebay.com.au/USB-ISP-Programmer-for-ATMEL-AVR-ATMega-ATTiny_W0QQitemZ160317691121QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item160317691121&_trksid=p3286.c0.m14&_trkparms=66%3A2)|65%3A1|39%3A1|240%3A1318
i mighty pick one up sometime soon too, if i see one cheaper ill let you know. are you gonna use serial or usb connection?
EDIT: sparkfun sells these cheap ones too:
http://www.sparkfun.com/commerce/product_info.php?products_id=13 (http://www.sparkfun.com/commerce/product_info.php?products_id=13)
http://www.sparkfun.com/commerce/product_info.php?products_id=14 (http://www.sparkfun.com/commerce/product_info.php?products_id=14)
-
im gonna use a serial port. yeah if u see one make a note of where you saw it.
Thanks,
Rmelnikas
-
check out sparkfun in their avr programmers section. they range from about $16.00-$50.00
-
make sure you order like 5 of everything
-
make sure you order like 5 of everything
amen to that, everyday i had to go down to dick smith afterschool. it was no fun :(
-
make sure you order like 5 of everything
Unless you *really* screwed up, you'd only need extra ATmega's and voltage regulators.
You probably would want extras for future projects, however . . .
-
and the discount for buying more is good