Squirrels have fuzzy tails.
0 Members and 1 Guest are viewing this topic.
I figured out the problem to be a loose usb connector on the axon. I have to hold it and wiggle it around before it detects. Do you have any recommendations?
I just did a continuity test and looks like 2 the last pins on the left might be shorted.
I have a very similar problem to yerbie. Expect i doubt my axon usb connector is loose And my presentation is in 2 days -.-Alright, i went through and checked every pin in the usb cable nothing wrong. I hooked up the cable to the axon microcontroller, and then check all 4 pins. Electricity is flowing through all pins! (positive negative data+ data-) and yet it does not work.
Unfortunately i don't know anyone personally that is into robots, so i doubt i can find an ISP programmer and there are essentially no hobby shops of this sort in proximity D: