Search results for: $50 robot

Pages: 1 2 3 ... 45
1
Electronics / 50$ robot with rangefinder not working/ hex file needed
« by madshah on July 31, 2015, 10:21:39 AM »

......  have a problem with the hex file of 50$ robot with sharp IR. I have successfully made the 50  ............  robot but I am having issues with the rangefinder  ............ . Can somebody please send the hex file of the 50$ robot with sharp IR. The source code is on the site. I  ......
2
Electronics / 50 $ robot modifying the servos
« by pedromatias on November 19, 2014, 05:13:49 PM »

......  I started building the 50$ robot and I'm in the beginning, where it says I should  ......
3
Electronics / Help regarding which programmer to choose for $50 robot
« by kalpeshprithyani on January 15, 2015, 03:48:15 PM »

......  for a good AVR programmer to programme my $50 robot but couldn't find one. However I came  ............  be knowing the pain of arranging parts for the robot. ), I can't consider shipping an option from  ............  digikey or sparkfun because it costs like $50 just for the shipping purpose, which is not  ......
4
Electronics / $50 robot sensor problem
« by SHREYANSH JAIN on November 08, 2013, 06:48:03 PM »

...... ... i have made $50 robot but the photoresistors are not working  ......
5
Mechanics and Construction / Re: Doubts regarding 50$ robot
« by waltr on January 12, 2013, 01:40:30 PM »

......  threads here on how different people built the $50 robot. It would be well worth your time to look  ............  330 Ohm resistor would work (do read the other $50 bot threads as this has been discussed). 4- It is  ......

......  that is required to build a stair climbing robot for uner $50. It needs to travel 12 steps in  ............  search before you ask   http://www.societyofrobots.com/robotforum/index.php?topic=14487.msg106100# ......
7
Electronics / USBTinyMkII Rev as a programmer for $50 robot?
« by Atak on August 17, 2012, 11:36:53 PM »

...... 'm looking for a programmer for the $50 robot. Would the USBTiny MkII programmer work?  ......
8
Software / my $50 robot
« by greywanderer012345 on August 21, 2012, 09:06:13 PM »

...... ? Admin, you go all out. I just got my $50 robot to work about a week ago.   I couldn't  ............  than most people do while making just the basic $50 bot. (I can even make sense of and use the  ............  the chassis. The goal of this was to get the robot to follow a flashlight beam on the ground, and  ......
9
Electronics / Re: $50 robot eagle PCB review
« by ErikY on June 24, 2012, 04:30:44 AM »

...... :21 PM  Would someone be so kind as to review my $50 robot eagle PCB board?   Always include both  ............  this layout I made: http://That.Homepage.dk/PDF/$50_Robot_SCH_OVL_PCB.pdf It's single sided, doesn't  ......
10
Software / Re: programming $50 robot w/ Mac
« by joe61 on March 09, 2012, 06:26:37 PM »

......  as the arduino, but then you're not building the $50 robot anymore :-)  Joe  ......

......  microcontroller and I will also build the $50 robot with the stock microcontroller. ......
12
Misc / $50 Robot - My experience and advice for others
« by MarkBrown on August 17, 2008, 06:39:49 PM »

......  the weekend I have built the MCU for the $50 robot. Although the tutorial was excellent and  ......
13
Electronics / Re: Wat dus d $50 robot do exactly
« by Bret on December 01, 2008, 11:48:02 AM »

......  program the $50.00 robot with the AVR Studio. After that you can  ............  the robot and it will run on it's own without being  ............  it is all explained here:  http://www.societyofrobots.com/step_by_step_robot_step4. ......

......  easily incorperate a serial connection into the $50 robot board. ......
15
Mechanics and Construction / 50 Dollar Robot Line Following Modification
« by airman00 on September 06, 2008, 07:06:37 PM »

......  , and decided to make a post.  The 50 dollar robot can be easily modified for line following. Just  ............ .   Hopefully, someone who has built the 50 dollar robot can demonstrate this on their robot and perhaps  ......
16
Software / Debugging the $50 Robot Help
« by BinarySlave on December 11, 2009, 05:19:39 PM »

...... , I've just added Sharp IR Rangefinders to my $50 Robot and I was hoping to get the values from  ............  from the scanner.  Does debugging work with the $50 Robot? I have been unable to get past the "The  ............  I'm using the original make file from the 50_robot_sharpIR source with the "DEBUG = stabs" and " ............  C source code running on the ATMega8 of the $50 Robot with AVR Studio v4.14 and the AVR ISP 2  ............  should look at. I'm also curious about the "$50 ROBOT UART TUTORIAL" (http://www.societyofrobots. ............ /microcontroller_uart_50_robot.shtml). Does setting this up allow me to output  ......
17
Software / NEED TESTERS: $50 Robot Arduino Library
« by Razor Concepts on April 09, 2009, 12:52:19 PM »

......  created a library in Arduino for the $50 robot. I need some help verifying that it works  ............  and download the software: http://www.societyofrobots.com/member_tutorials/node/327  And tell me if  ............  and blink_example sketches work on the $50 robot board. Thanks! ......
18
Electronics / Re: another one for the $50 robot
« by airman00 on March 02, 2008, 06:43:40 AM »

......  to build?   and also why are you building the $50 robot MCU , if you are just going to buy your own? ............  also, so you could add it yourself to the $50 robot  ......
19
Electronics / Re: $50 robot servos
« by airman00 on March 01, 2008, 06:21:26 PM »

......   is it okay to use the HS 322 HD servo for the $50 robot    yes , HS 322 can be modified  ......
20
Robot Videos / ATmega8 and the $50 Robot - possibilities
« by Admin on March 12, 2008, 11:25:57 AM »

......  are lots of videos of what you can do with your $50 Robot ATmega8 microcontroller thats worth looking  ......
21
Software / $50 robot code posting
« by cooldog on February 18, 2008, 07:53:27 AM »

......  can post there code that they've used with the $50 robot board  excluding line follower photovore  ......
22
Misc / Re: Question about Atmega 8 IC chip on $50 robot
« by Admin on November 09, 2008, 01:25:19 AM »

......  part number is in the $50 Robot tutorial.  Also, if you open up the  ............ , but its a skill you need to learn as a budding robot builder ) ......
23
Robot Videos / Tracked robot with engine and 12v 250w tracks motors
« by Saso on December 14, 2023, 06:52:40 AM »

......  Here is video of tracked robot Aprox 90cm long, 100cm wide Huge pulling power 3, ......
24
Electronics / Up to 50% OFF On Robots, Intelligent Car and Accessories
« by ICStation on August 14, 2015, 03:18:56 AM »

......  Robots, Intelligent Car and Accessories on ICStation  ......
25
Software / LAB volt 5250 Robotic arm
« by Dur-e-Tabish on June 28, 2014, 12:26:48 AM »

......  of linear slide in Matlab interface of Lab volt Robotic arm 5250??  Has anyone ever interfaced Robosim ( ......
26
Software / $50 robot programming error
« by SHREYANSH JAIN on August 03, 2013, 10:55:14 AM »
27
Electronics / electronics and power for $50 robot
« by redd0123 on June 20, 2012, 01:59:11 PM »
28
Electronics / $50 robot AAbattery connection
« by shreyansh on January 10, 2012, 07:39:07 AM »
29
Electronics / 50$ Robot tutorial
« by Melcin Powell on December 30, 2010, 04:08:45 PM »
30
Electronics / $50 robot tutorial 4.8v battery pack
« by Melcin Powell on December 30, 2010, 08:40:00 PM »
31
Software / Smoother turning program for the $50 robot
« by Selenaut-14 on July 06, 2010, 09:10:21 AM »
32
Misc / Robot 250, Pittsburgh
« by Admin on June 14, 2007, 01:39:23 PM »

......  to you. There are still some slots open for the robot-building Open Studios at the Mattress Factory  ............  up.  It's FREE!  The Mattress Factory and the Robotics Institute at Carnegie Mellon University  ............  Robot 250, a series of free, hands-on robot-building  ............  friends and family to tinker, explore and create robots that sense and interpret your world.    ............ , you?ll be trained on some of the latest in robotic sensing technology, robotic camera apparatus ( ............ !), and hear from some of the leading artists and roboticists at work in Pittsburgh today.   You?ll also  ............  your hand at creating a robot that senses the world, and interprets that  ............ .3169 x212 F: 412.322.2231 www.mattress.org   The Robot 250 mission is to produce social change through  ............  city?s 250th Anniversary, and create a legacy of robotics enthusiasts.  Dennis Bateman Project Director  ......
33
Misc / sell $50 robot parts to me in Indonesia?
« by er1ck on September 17, 2008, 12:11:46 AM »
34
Software / 50$ robot .hex for servos
« by SciOlyStudent on December 03, 2007, 02:41:39 PM »
35
Software / C++ Library for $50 Robot - Version 2
« by Webbot on January 03, 2009, 01:16:31 PM »

......  stuff.  It can be found here: http://www.societyofrobots.com/member_tutorials/node/ ......
36
Software / Makefile Basics - $50 robot and not using standard MCU
« by pilot_error on July 15, 2010, 04:19:54 AM »

...... " makefile like the one the SoR provide with their $50 robot source code. If you are using a different  ............  build.   A less than auspicious start for me robot hobby but progress is being made.  ......

......  think this is worth noting for your next big robot project:  It uses mosfets and an atmega8  ......
38
Misc / Makezine $500 Robot Contest (enter your $50 bot)
« by Admin on March 24, 2010, 09:55:50 PM »

......  use CD/DVD parts in any way you want to make a robot.  So enter your $50 Robot, make a profit, and don& ............  forget to link back to SoR   http://makezine.com/robotbuild/ ......
39
Electronics / Servo SG5010 Modifying ?! for making 50$ Robot
« by farsam1984 on February 10, 2010, 01:26:35 AM »

......  According to 50$ robot tutorial HS-311 servos need to modify (as it has  ......
40
Misc / $50 robot question
« by ert481 on March 07, 2010, 05:37:45 PM »

......   delay_cycles(200);  }how can i change it so the robot can go backwards? you cant do this servo_left(-50) ......
41
Electronics / Re: $50 Robot Microcontroller
« by Webbot on September 10, 2008, 08:00:39 PM »

......  a really powerful servo, I am building a racing robot after the $50 one.    Not wanting to be dull -  ............  your new question is no longer about '$50 Robot Microcontroller'. Why not search for ' ......
42
Electronics / Re: 50$ robot photoresistor
« by Admin on July 21, 2007, 06:26:00 AM »

......  properties of a good photoresistor to use for the $50 bot.  As far as the $50 robot is concerned, if it  ......
43
Electronics / Re: Using Arduino Uno for the 50$ robot
« by vitalik53 on March 23, 2012, 11:51:53 PM »

......  'Admin's' code for the SHARP IR rangefinder $50 robot, not the photoresistor $50 robot, into  ......
44
Electronics / Re: Has Anyone Here Tried Netbook Controlled "$50 Robot"?
« by rbtying on March 13, 2012, 10:01:35 PM »

......  nearly everywhere), you can interface with your $50 robot controller using its USART, which saves you  ......
45
Misc / Re: $50 robot in google sketchup
« by jamort on March 08, 2009, 04:53:36 PM »

......  woul you need a google sketch up for the $50 robot anyway the chasis is no where near  ......
46
Electronics / Re: $50 robot cable
« by ed1380 on March 29, 2008, 01:26:37 PM »

......  you can get a datasheet on it and resolder the $50 robot  ......
47
Software / Re: 50$ Robot atmega328p a2d conversion
« by ytz on November 23, 2009, 02:44:39 PM »

...... :15:31 PM  Any reason you aren't using the default $50 Robot code? I mean, there is no need to bother/ ......
48
Mechanics and Construction / Re: I am making $50 robot
« by Conscripted on July 14, 2013, 08:27:22 PM »

......  luck with your $50 robot. Many of us here have built it.   Servos  ......
49
Electronics / Re: $50 robot with differrent MCU, motors and sensors
« by Admin on March 09, 2008, 10:52:26 AM »

......  for a motor than for a servo  http://www.societyofrobots.com/robot_faq.shtml#servo_motor  And it wouldn't  ............  be the $50 Robot if you replace everything in the tutorial   ............ , keep your first robot simple, and worry about all those neat ideas you  ............  for your 2nd robot.   As for using the Orangutan, you'd have to  ......
50
Electronics / Re: $50 Robot PWM
« by Arkboy on September 17, 2012, 09:34:26 AM »

......  3 aren't one of them, and they are used on the $50 robot, so my assumption was that the servos were  ......
Pages: 1 2 3 ... 45