Mechanics and Construction > Mechanics and Construction

Universal Servomotor Bracket Assembly

(1/3) > >>

alephan:
I need one of those and i saw that it costs about 40$. Is there any way i can have a plan with these specific dimensions in order to build one of my own?! I will use it for a servomotor: hitec HS-322. Need HELP! Please!

ed1380:
anyone of these would work.
I'd get the ones on the far right
http://www.servocity.com/html/mounting_brackets.html

alephan:
man i'm talking of making this thing of my own. to build it! need the dimensions, an autocad plan or something

Somchaya:

--- Quote from: ed1380 on April 24, 2007, 05:26:14 AM ---anyone of these would work.
I'd get the ones on the far right
http://www.servocity.com/html/mounting_brackets.html

--- End quote ---

Hmm, I've got those mounts and used them for a while. They're pretty decent, but don't exert too much weight on the servos, since the mounts are connected to your base by only one screw, so it does bend after a while. I had around 5-6 kg resting on two wheels connected with these mounts, and the sag in the wheels was very noticeable after a while (a few days).

If you don't overload the mounts, they're great though :)

alephan:
so you have these brackets? may i have a dimensions plan of them?

Navigation

[0] Message Index

[#] Next page