Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: IMCProgrammer on March 02, 2009, 08:54:26 PM

Title: Heli-Max Receiver Help
Post by: IMCProgrammer on March 02, 2009, 08:54:26 PM

I want to RC my bot with a Heli-Max CCPM 5 Channel FM Radio Control System running at 72.910 mhz.  The receiver is a tiny 1" by 2" board with 6 sets or three pins.  I think it was in a helicopter.  I need to attach power and small servos but don't know how to wire it.  I could not find a schematic on the Web and Heli-Max has not responded to my emails.

How do I hook this thing up?

Title: Re: Heli-Max Receiver Help
Post by: Razor Concepts on March 02, 2009, 09:10:31 PM

Not the same receiver but the pin layout is the same
(http://www.rk2trade.com/rk2trade/images/E_Sky_Futaba_JR_Mini_6_Channel_FM_RC_Receiver_35Mhz_9g.JPG)
Outer pins are ground, middle pins are + and inner pins are signal. Attach your 5v battery to any ground and + pins.