Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: sohailsameja on March 07, 2013, 04:39:17 AM

Title: which is a good line follower robot to build
Post by: sohailsameja on March 07, 2013, 04:39:17 AM

IT SHOULD BE EASY TO MAKE,LITTLE COST
SHOULD NOT HAVE CHIPS ONLY TRANSISTORS OR OTHER STUFF AND USE AN LDR AND HAS A GOOD TURNING SYSTEM

Title: Re: WHICH IS A GOOD LINE_FOLLOWER ROBOT TO BUILD
Post by: newInRobotics on March 07, 2013, 05:12:46 AM

You have posted two microcontroller-less line followers, one of them uses LDR; it consists of one transistor, 2 motors and 1 LDR (very cheap); can make very sharp turns;

Title: Re: WHICH IS A GOOD LINE_FOLLOWER ROBOT TO BUILD
Post by: sohailsameja on March 07, 2013, 10:09:10 AM

THANK YOU VERY MUCH :) :) I SHALL MAKE BOTH,I FINALLY FOUND MY L293D IN THE DUSTBIN AFTER 3 DAYS.