Society of Robots - Robot Forum
Software => Software => Topic started by: andreahmed on March 11, 2008, 12:28:44 AM
-
Hi, i made a robot to follow a straight line at a high speed but there's a high inertia ... i wanted to cross 3 intersection lines and it goes after the 3rd line by 2 other lines !!! , how do i solve this ?
http://www.youtube.com/watch?v=g2_9nDmEmPo
here's a video
-
You need a PID (http://www.societyofrobots.com/programming_PID.shtml) system implemented.
Otherwise, if you want a quick fix, have your motors reverse at full speed right after it passes the last line. I hope your motor drivers can handle 2x current and a voltage spike ;)