Author Topic: 16x2 Sparkfun SerLCD  (Read 2210 times)

0 Members and 1 Guest are viewing this topic.

Offline sasapTopic starter

  • Jr. Member
  • **
  • Posts: 11
  • Helpful? 0
16x2 Sparkfun SerLCD
« on: September 02, 2010, 04:57:29 AM »
I'm using AxonII and Sparkfun Serial Enabled 16x2 LCD - White on Black 5V.
My lcd will show only 7 char on left side on two lines.

Thanks for the help.

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: 16x2 Sparkfun SerLCD
« Reply #1 on: September 02, 2010, 06:34:57 PM »
Hi,

Post the code you use (in the software section please), it sounds like a software problem.
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline sasapTopic starter

  • Jr. Member
  • **
  • Posts: 11
  • Helpful? 0
Re: 16x2 Sparkfun SerLCD
« Reply #2 on: September 02, 2010, 11:19:09 PM »
Problem Solved with the code:

rprintfChar(124);
rprintfChar(4);  //16
rprintfChar(124);
rprintfChar(6);  //2

Thanks.

 


Get Your Ad Here