Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: Proctor on June 19, 2012, 05:53:17 PM
-
Hi guys,
I'm working on the $50 dollar robot and doing the 4xAA battery holder and a 9v battery method. I have done everything but cant seem to connect with my robot. When i plug it in my robot moves a little bit but then stops right away. I would like to know if it has to do with ponyprog i/o port settings. DO i use serial or parallel? serial im guessing. Then do i use SI Prog API, SI Prog I/O, or JDM API?
Please help, Thanks.