Society of Robots - Robot Forum

Software => Software => Topic started by: icoms8 on February 06, 2009, 01:15:49 AM

Title: $50 robot help
Post by: icoms8 on February 06, 2009, 01:15:49 AM

When I try to upload the program it says Device is unknow. What is wrong?

Title: Re: $50 robot help
Post by: frodo on February 06, 2009, 02:16:24 AM

have you selected the wrong COM port in settings than what you are using?

Title: Re: $50 robot help
Post by: HePE on February 08, 2009, 02:22:47 AM

I think its safe to assume your using PonyProg..

In support of Frodo's pot:

click on the "wrench icon"  and tryto play around with the different ports there. Soon you'll hit on the right one

Title: Re: $50 robot help
Post by: frodo on February 08, 2009, 05:20:01 AM

it all depends on which is "connected". Yes just play around until you find the right COM port :)

Title: Re: $50 robot help
Post by: Joesavage1 on February 08, 2009, 09:10:01 AM

 

Quote from: frodo on February 08, 2009, 05:20:01 AM

it all depends on which is "connected". Yes just play around until you find the right COM port :)

Agreed. the COM port is usualy the problem


Joe

Title: Re: $50 robot help
Post by: icoms8 on February 08, 2009, 06:32:57 PM

I probed each COM and COM came back ok but it still says device is missing or unknow

Title: Re: $50 robot help
Post by: Joesavage1 on February 10, 2009, 01:01:43 PM

Have you tried restarting your OS sometimes its just decided it wants to be annoying.