Society of Robots - Robot Forum

Mechanics and Construction => Mechanics and Construction => Topic started by: paulstreats on May 25, 2010, 02:41:06 PM

Title: Polymer Clay?
Post by: paulstreats on May 25, 2010, 02:41:06 PM
I saw a book today called "Creative Designing With Polymer Clay" or something like that.

Anyway it turns out that Polymer Clay is a mouldable plastic with mouldable characteristics like natural clay. Once a shape is made, it is placed in the oven at 110C for 30 mins to set/harden.

Apparently, it sets like a plastic material (its a polymer of PVC) and can be machined and stuff once set.

 So has anybody ever used it? anyone got any more info? and would it be any use in creating custom parts for robotics(considering that its a plastic that can be moulded easily into any shape and then permanently hardened)?
Title: Re: Polymer Clay?
Post by: Razor Concepts on May 25, 2010, 03:25:25 PM
Wow, its like the opposite of polymorph/shapelock!
Title: Re: Polymer Clay?
Post by: Gertlex on June 28, 2010, 07:23:21 PM
It might be good stuff.  Or it might be purely artistic stuff.  As a kid I had this clay that could be molded and baked.  The end result looks like a polymer to me.  However, it's fragile.  You could machine it, I'm sure, but it wouldn't be any good in bending or tension.

But I'm sure there are materials like you describe of higher quality than what I described.
Title: Re: Polymer Clay?
Post by: voyager2 on June 28, 2010, 08:43:27 PM
Were is it sold?
It sounds good, is it waterproof or will it fall apart after a few minutes, like clay.
Is it light, I could use it in my robot fish!
Title: Re: Polymer Clay?
Post by: Soeren on June 28, 2010, 10:01:16 PM
Hi,

I saw a book today called "Creative Designing With Polymer Clay" or something like that.

[...]

 So has anybody ever used it? anyone got any more info? and would it be any use in creating custom parts for robotics(considering that its a plastic that can be moulded easily into any shape and then permanently hardened)?
Yes, it's sold under (among other) the names Cernit and Fimo Clay in hobby stores (the kind that sells "pearls" and DIY "jewellery" and such),  it comes in all sorts of colors (I have a pack of glow-in-the-dark right in front of me) and "finishes", like granite stone, silver metal, neon colors, etc. etc.
It's used extensively for making "jewellery" (for lack of a better term), but anything goes. When my sons were kids, they loved making refrigerator magnets (so much that I cannot see my fridge for magnets ;D).

It is not for super precision, as it flows a tiny bit when being baked and afterwards, it's like a semi rigid (or is that semi soft) plastic it can be filed and cut with care and sharp tools, I wouldn't try to make a screw thread in it, bot a bolt through should be OK - just make sure there's no cracks in it before it goes into the oven - that means hand wash immediately before working with it and perhaps latex gloves, as skin oils and grime will make it not stick to itself.

http://www.sculpey.com/products/clays/sculpey-bake-shop (http://www.sculpey.com/products/clays/sculpey-bake-shop)


And here's what to give dad when he have a Ferrari on his wish list:
Fimo Clay Penndants (http://www.youtube.com/watch?v=eYzdM_G3CBI#ws)
(He'll probably mention something about you being adopted and all, but he'll love it... Trust me... Or not  ;D ;D ;D)
Title: Re: Polymer Clay?
Post by: Gertlex on June 28, 2010, 10:35:06 PM
Yes! Sculpey. That's exactly what I played with years ago... mostly my siblings and I made pokemon :)