Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: Becky on March 08, 2009, 10:47:02 AM
-
Hello - firstly, the electronics part is not really my forte at all and I am waiting for the programming side. I have just made my circuit and ... nothing.
No smoke, no light. I have followed everything (I thought) word for word and I have my battery pack plugged in. I am sitting with a multimeter and I know I have current all the way up to LED and then nothing - just in case I made a temporary connection with an additional LED but still nothing.
Please can somebody tell a noob what to look for?
Many thanks
-
LED doesnt light up when you plug the power in, you have to program the microcontroller to turn the LED on.
-
:D cool that's cheered me up... so if there's no smoke is it safe to plug in the microcontroller now?
-
yup, just power it up and program away!