Don't ad-block us - support your favorite websites. We have safe, unobstrusive, robotics related ads that you actually want to see - see here for more.
0 Members and 1 Guest are viewing this topic.
Just get some free samples of female breakaway headers. I got a bunch and use them for unimportant things, and I use the molex connectors and crimpers for more important stuff.
oh, well as i said i dont wanna but anything more, so female headers is even more out of the question as i may aswell do it the other way if i way going to buy anything..I need a solution were i dont have to buy anything extra but it dont look to ghetto either.Thanks In AdvanceJoe
What cables? i see two metal terminals on the bottom thats all.
(btw if your reffering to the link, then is there another way that i dont have to mess around with extra wires and things?)
you guys got it.just a few words of advice.If you have a desoldering tool, use it carefully on the board, the whole copper soldering ring on it may get sucked off(bad experiences).then it is way harder to solder your components on
It's part of the fun!
"vin" is voltage in"vout" is voltage out"gnd" is groundso vin is +, vout is signal in this case?, gnd is negative power.
No Offence, but I asked for insturctions without the whole Vin and Vout Thing, just while im making, ill figure out how that bit works afterThanksJoe
I have another question about the circuit.how come there are 3 dots colored pink on the microcontroller?which go to which?
okay then, arrange them like this:GROUND+5VSIGNALokay so it doesnt matter to much as long as the +5v is in the middle because you can always flip the header around cant ye?
Quote from: SmAsH on March 05, 2009, 01:21:20 PMokay then, arrange them like this:GROUND+5VSIGNALokay so it doesnt matter to much as long as the +5v is in the middle because you can always flip the header around cant ye?How do i arrange them like that? I see 2 terminals, which one is +5v whats GND and whats SIGNAL.?Sorry For NoobishnessJoe
Quote from: Joesavage1 on March 06, 2009, 01:34:24 AMQuote from: SmAsH on March 05, 2009, 01:21:20 PMokay then, arrange them like this:GROUND+5VSIGNALokay so it doesnt matter to much as long as the +5v is in the middle because you can always flip the header around cant ye?How do i arrange them like that? I see 2 terminals, which one is +5v whats GND and whats SIGNAL.?Sorry For NoobishnessJoehttp://www.societyofrobots.com/robotforum/index.php?action=dlattach;topic=3292.0;attach=2439We are talking about sensor inputs.blue is signalblack is ground+5V is mauve