Author Topic: FBOOT for Axon/Axon II: version for Linux and OS X  (Read 3428 times)

0 Members and 1 Guest are viewing this topic.

Offline AdminTopic starter

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
FBOOT for Axon/Axon II: version for Linux and OS X
« on: January 09, 2010, 11:52:06 PM »
http://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_id=1927&item_type=project

Quote
Danni's bootloader (fast tiny & mega UART bootloader) is fast and tiny, and works on many AVRs just by including the part's ".INC" assembly description file.
http://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_id=1008&item_type=project

Its only short-coming is that the program that talks to the bootloader is written for DOS, with at least one Windows version floating around the net.

Then, Andreas Butti contributed an almost-working linux version here:
http://www.mikrocontroller.net/attachment/35618/Bootloader21_20080510.tar.gz

Finally yours truly finished it off and made it work on OS X and Linux.

Speed:
ATmega164P @ 18.432 MHz; 200 MHz Linux/ARM9 SBC @ 115200 baud
Flash/Verify: 13563 bytes in 2.51 seconds
Verify: 13563 bytes in 1.57 seconds

Options added in new version (1.1):
* Optional character sequence to send to AVR to initiate reboot
* Optional limit on retries to connect to AVR's bootloader
* Optional silencing of all output except errors
* Errors to stderr, exit 0 on success and -1 on failure

 


Get Your Ad Here

data_list