Author Topic: How to check the address of SRF08  (Read 1743 times)

0 Members and 1 Guest are viewing this topic.

Offline TVXQTopic starter

  • Beginner
  • *
  • Posts: 3
  • Helpful? 0
How to check the address of SRF08
« on: July 29, 2010, 07:39:41 PM »
Hi,

    Can anyone tell me how to check the address of the SRF08? Because I think I might have changed the address of the SRF08 and now I don't know how to check it's address.

Thank you.

Offline Webbot

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 2,165
  • Helpful? 111
    • Webbot stuff
Re: How to check the address of SRF08
« Reply #1 on: July 30, 2010, 05:45:43 AM »
Here's an extract:-

"When done, you should label the sonar with its address, however if you do forget, just power it up without sending any commands. The SRF08 will flash its address out on the LED. One long flash followed by a number of shorter flashes indicating its address. The flashing is terminated immediately on sending a command the SRF08."

The address should be one of:
E0,E2,E4,E6,E8,EA,EC,EE,F0.F2.F4.F6.F8.FA.FC.FE

Address              Long Flash     Short flashes
Decimal    Hex
224            E0    1      0
226      E2    1    1
228            E4    1    2
230            E6    1    3
232            E8    1    4
234            EA    1    5
236            EC    1    6
238            EE    1    7
240            F0    1    8
242            F2    1    9
244            F4    1    10
246            F6    1    11
248            F8    1    12
250            FA    1    13
252            FC    1    14
254            FE    1    15
Webbot Home: http://webbot.org.uk/
WebbotLib online docs: http://webbot.org.uk/WebbotLibDocs
If your in the neighbourhood: http://www.hovinghamspa.co.uk

 


Get Your Ad Here