Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: harrisiqbal on September 05, 2011, 04:55:39 AM

Title: AVR Programmer with Atmega8 Chip $50 Robot
Post by: harrisiqbal on September 05, 2011, 04:55:39 AM

Ok my apologies if this has been answered before ( I did search to no avail).

I'm new to the whole robot scene. Well not really. I have build robots using the Vex Robotic System but nothing where I had to do all the electronics from scratch.

Anywayz,

 So, I was wondering if the AVR STK Serial Port Dongle Programmer that is "required" for the $50 Robot Project can be substituted with a custom made Parallel Port Programmer... based on this tutorial:

http://www.arduino.cc/en/Hacking/ParallelProgrammer (http://www.arduino.cc/en/Hacking/ParallelProgrammer)

Will this work okay in building the $50 Robot?
The custom parallel port cable does not seem very difficult for me but in terms of electronic compatibility with the MicroP chip. Will it work? -)

Thanks!

Title: Re: AVR Programmer with Atmega8 Chip $50 Robot
Post by: billhowl on September 05, 2011, 09:06:45 AM

Yes, It will work.