Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: BANE on May 31, 2009, 01:26:31 PM
-
Hello,
So doing some more testing with my test plateform robot. I have a wireless PS2 receiver and I was wondering if I would get more range if I attached a antenna from a wireless net receiver to it. I honestly don't know too much about antennas but does each antenna have some frequency rating or something? This antenna is for a 2.4Ghz (I think). Heres a pic of the PS2 receiver, I'm hoping i can just solder on the antenna on the exposed metal on the top.
Bane
-
Just to be clear the PS2 receiver is also 2.4GHz.
http://www.lynxmotion.com/Product.aspx?productID=552&CategoryID=46 (http://www.lynxmotion.com/Product.aspx?productID=552&CategoryID=46)
Bane
-
Hmm, apparently I'm not the only one in the dark about this :D. I found the exact antenna here http://www.sparkfun.com/commerce/product_info.php?products_id=558 (http://www.sparkfun.com/commerce/product_info.php?products_id=558)
Can anyone at least tell me if the pin in the connector is what gets connected to antenna and if the rest should be grounded?
Bane