Society of Robots - Robot Forum

Software => Software => Topic started by: geek1 on January 01, 2009, 08:48:15 AM

Title: Servo modification source code HELP!!!
Post by: geek1 on January 01, 2009, 08:48:15 AM

Can someone please post source code to center a servo for modification?
C is the language I will be using.




Thanks.

Title: Re: Servo modification source code
Post by: airman00 on January 01, 2009, 11:15:04 AM

Which microcontroller

Title: Re: Servo modification source code
Post by: geek1 on January 01, 2009, 01:13:56 PM

Roboduino/ATmega8

Title: Re: Servo modification source code HELP!!!
Post by: Admin on January 09, 2009, 10:08:38 PM

Its on this page:
http://www.societyofrobots.com/actuators_modifyservo.shtml

ATmega8:
http://www.societyofrobots.com/downloads/hold_servo.hex

where else? :P

btw, the Roboduino doesn't use the ATmega8 ;D