go away spammer

Author Topic: AVR USB ISP Programmer  (Read 2943 times)

0 Members and 1 Guest are viewing this topic.

Offline claesson92Topic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
  • EARP.co.nr
    • Project EARP
AVR USB ISP Programmer
« on: November 07, 2007, 02:50:05 AM »
Hi, i'm planning to buy a AVR programmer. I checked the 35$ programmer at digikey. But the shipping would cost almost 70$ to sweden. And i don't feel like paying twice as much for shipping. :P
I found this programmer: http://www.elfa.se/elfa-bin/setpage.pl?http://www.elfa.se/elfa-bin/dyndok.pl?lang=en&dok=5865.htm?_73_680_04
A little bit more expensive. But Elfa has stores located in sweden, so shipping would be cheaper. You think it will work? and don't take hours to program like the PonyProg one?
Why solder? Let's just glue it all together!
Free Samples, anyone? http://www.societyofrobots.com/robotforum/index.php?topic=2197.0
My Project: http://earp.co.nr/

Offline JonHylands

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 562
  • Helpful? 3
  • Robot Builder/ Software Developer
    • Jon's Place
Re: AVR USB ISP Programmer
« Reply #1 on: November 07, 2007, 05:48:48 AM »
That's the same one that Digikey sells. I use it for all my AVR work, and it works great...

- Jon

Offline claesson92Topic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
  • EARP.co.nr
    • Project EARP
Re: AVR USB ISP Programmer
« Reply #2 on: November 07, 2007, 05:51:03 AM »
That's the same as the 35$ programmer at digikey?
Why solder? Let's just glue it all together!
Free Samples, anyone? http://www.societyofrobots.com/robotforum/index.php?topic=2197.0
My Project: http://earp.co.nr/

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: AVR USB ISP Programmer
« Reply #3 on: November 07, 2007, 07:44:42 AM »
Well if you zoom in on the image, you will see the Atmel brand name on it . . . so unless its a cheap chinese (swedish?) ripoff, then yeap its the same one :P

Offline claesson92Topic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
  • EARP.co.nr
    • Project EARP
Re: AVR USB ISP Programmer
« Reply #4 on: November 07, 2007, 07:53:57 AM »
Great. =) Thanks!
Why solder? Let's just glue it all together!
Free Samples, anyone? http://www.societyofrobots.com/robotforum/index.php?topic=2197.0
My Project: http://earp.co.nr/

 


Get Your Ad Here