Author Topic: Futaba S148 servo modification - plz help  (Read 3056 times)

0 Members and 1 Guest are viewing this topic.

Offline frodoTopic starter

  • Supreme Robot
  • *****
  • Posts: 329
  • Helpful? 2
  • BOW DOWN TO MY MIGHTY STARE!!
Futaba S148 servo modification - plz help
« on: January 17, 2009, 07:23:00 PM »
hi, has anyone used the Futaba S148 servo? if anyone has, is it the same to modify as the hitec HS-311 using admins instructions?
OMG!!!! I AM SUPREME ROBOT!!!

Check out my Web

Offline Razor Concepts

  • Supreme Robot
  • *****
  • Posts: 1,856
  • Helpful? 53
    • RazorConcepts
Re: Futaba S148 servo modification - plz help
« Reply #1 on: January 17, 2009, 07:47:16 PM »
All servos run on the same principle, so you will be able to modify it without a problem.

Offline frodoTopic starter

  • Supreme Robot
  • *****
  • Posts: 329
  • Helpful? 2
  • BOW DOWN TO MY MIGHTY STARE!!
Re: Futaba S148 servo modification - plz help
« Reply #2 on: January 18, 2009, 07:37:32 AM »
ok thanks.
OMG!!!! I AM SUPREME ROBOT!!!

Check out my Web

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Futaba S148 servo modification - plz help
« Reply #3 on: February 02, 2009, 07:42:20 AM »
Some of the really small micro servos aren't modifiable, at least not easily. Standard size servos are all modifiable.

Offline scottad73

  • Jr. Member
  • **
  • Posts: 24
  • Helpful? 0
Re: Futaba S148 servo modification - plz help
« Reply #4 on: August 15, 2010, 06:48:04 PM »
just for those interested, the Hitec HS322-HD is one of the easiest servos to mod to 360 degrees.  Just center the servo, remove the gear case, cut the notch on the drive gear, cut the exposed knob off from the pot and glue the cut knob. your done.  web has good pics of it

 


Get Your Ad Here

data_list