Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: clax on September 07, 2012, 11:05:07 PM
-
i have made a rf transmitter and receiver and it is sending and receiving data..
but i have a problem..
when both encoder n decoder circuit are on,all leds glow in the receiver part and as soon as data pins are grounded on the encoder side,the led stop glowing.
i WAnt to REVERSE this operation,that is the Led should glow on pressing/grounding the data pins on encoder ..
plz help me suggest me something that i should do..
its very urgent..
thanx in advance.
-
i have made a rf transmitter and receiver and it is sending and receiving data..
but i have a problem..
when both encoder n decoder circuit are on,all leds glow in the receiver part and as soon as data pins are grounded on the encoder side,the led stop glowing.
i WAnt to REVERSE this operation,that is the Led should glow on pressing/grounding the data pins on encoder ..
plz help me suggest me something that i should do..
Post a schematic and post links to datasheets for the chips used! At least if you want usable answers.
its very urgent..
Only to you ;)