Don't ad-block us - support your favorite websites. We have safe, unobstrusive, robotics related ads that you actually want to see - see here for more.
0 Members and 1 Guest are viewing this topic.
I think that the problem is that i can't get my hands on a quality 9V batteries , and i won't be able to do so because it something related to importing economical goods into my country
Also why not use a cell phone battery i've read on one of them that it can give out current up to 800 mA while my battery can be short circuited to give at max 100 mA
P.S. i've checked that there are no voltage drops in the circuit it gives 6V at the battery cap and 6V at the output of the motors (i know i use 9V battery but i told u before its of very low quality )
Which country do you reside in?
What does the battery measure when you remove the load?
I live in Egypt , unfortunately project components are not widely spread here , just electronic stuff for replacing parts of devices and stuff like that.
QuoteWhat does the battery measure when you remove the load?When i measured the volt i didn't measure it while having the circuit running i just put the multimeter terminals on the battery wires and it it gave 6V reading
also when i created a short circuit i did put the battery and a 1k Resistor , and the multimeter in series with each other and it gave that 100 mA reading.
QuoteWhich country do you reside in?I live in Egypt , unfortunately project components are not widely spread here , just electronic stuff for replacing parts of devices and stuff like that.QuoteWhat does the battery measure when you remove the load?When i measured the volt i didn't measure it while having the circuit running i just put the multimeter terminals on the battery wires and it it gave 6V readingalso when i created a short circuit i did put the battery and a 1k Resistor , and the multimeter in series with each other and it gave that 100 mA reading.Thanks
Could someone please tell what could be wrong!!!
Hi,Quote from: Libraoct7 on November 08, 2010, 10:58:16 AMCould someone please tell what could be wrong!!!The first thing that's wrong is that you double post in old treads with different subjects - please start a new one with a descriptive subject line.And if you want help, please state what equipment you have for troubleshooting, what you have done so far and how it did or didn't react.