Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: goatfish on March 05, 2008, 09:53:00 PM
-
ok so i have just recieved my servos in the mail(hs-322 hd),and after reading the modifying tutorial,i was wondering,do you need to have the robot brains made first,so that you can upload the .hex file to it?
do you also need the prgrams like winavr and the other ones to do it?
???
-
yes. the controller board has to be made and programmed with win avr/avr studio/pony prog. or do this http://www.instructables.com/id/modify-the-hitec-hs-325-servo-for-continuous-rotat/
-
what are you going to do with these servos?
-
well i plan to use the servos for the $50 robot ;D