go away spammer

Author Topic: 4mm motor shaft with D-shaped key  (Read 3652 times)

0 Members and 1 Guest are viewing this topic.

Offline apluscwTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
4mm motor shaft with D-shaped key
« on: April 29, 2013, 06:41:41 PM »
Any suggestions where I might find gears that fit a 4mm diameter shaft with D-shaped key feature?

THX!
 :)

Offline ROBOT420

  • Full Member
  • ***
  • Posts: 66
  • Helpful? 0
  • The Geeks shall inherit the earth!!
Re: 4mm motor shaft with D-shaped key
« Reply #1 on: May 02, 2013, 09:14:24 AM »
This link makes all kinds of gears.
http://www.rushgears.com/?referrer=GoogleGeneralGears&gclid=CNaT-p3a97YCFU6f4AodmQIAJQ


These would work, just tighten the set screw on to the flat side of the D on your output shaft.
http://www.pololu.com/catalog/product/1081


If possible find one that works here, as they help sponsor this site.
http://www.servocity.com/html/gears.html
Hope that helped.
« Last Edit: May 02, 2013, 10:29:19 AM by ROBOT420 »
Don't know jack, but want to know it ALL....let the journey begin!

Offline apluscwTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Re: 4mm motor shaft with D-shaped key
« Reply #2 on: May 02, 2013, 09:01:54 PM »
THX! Wish robot parts weren't SO expensive. :(

Offline ROBOT420

  • Full Member
  • ***
  • Posts: 66
  • Helpful? 0
  • The Geeks shall inherit the earth!!
Re: 4mm motor shaft with D-shaped key
« Reply #3 on: May 03, 2013, 10:08:16 AM »
I know what you mean....
Don't know jack, but want to know it ALL....let the journey begin!

 


Get Your Ad Here