go away spammer

Author Topic: Really flat and slim motor.  (Read 4451 times)

0 Members and 1 Guest are viewing this topic.

Offline Fredrik AnderssonTopic starter

  • Robot Overlord
  • ****
  • Posts: 216
  • Helpful? 0
Really flat and slim motor.
« on: November 11, 2008, 02:48:07 PM »
Im searching for a really really flat motor for a really slim design of a sumo robot. A slim robot will be invisible to many robots sensory! :)

The motors needs to be as flat as possible but still able to offer good amounts of torque. The idea is to put them pointed upward and gear it with a wormgear to get the output shaft outward to the sides. Hopefully I'll get down the height to 1 cm, if i find a flat enough motor.

Anyone that know where i could get such a motor?
Current project: Pirrh - Portable Intelligent Round Rolling Hexapod

Offline kevinisnekkid

  • Jr. Member
  • **
  • Posts: 30
  • Helpful? 0
    • Golden Bares
Re: Really flat and slim motor.
« Reply #1 on: November 12, 2008, 02:43:54 AM »
I have a few flat 6-wire stepper motors. I think I pulled them from old disk drives. The body is about 2inch in diameter, and about 1/2inch think. The shaft sticks out about 1/4inch. If you're interested, let me know.
Robots don't hide what they are.

Offline hudbrog

  • Jr. Member
  • **
  • Posts: 40
  • Helpful? 0
Re: Really flat and slim motor.
« Reply #2 on: November 12, 2008, 03:49:16 AM »

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Really flat and slim motor.
« Reply #3 on: November 13, 2008, 05:55:28 AM »
another option . . . use several small motors combined

 


Get Your Ad Here