Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: Mastermime on January 30, 2013, 09:18:41 PM

Title: PS2 Arduino Problems
Post by: Mastermime on January 30, 2013, 09:18:41 PM

Hello everyone,

I'm having major issues with getting output from my PS2 controller on Arduino serial monitor in crunch time.  I am using this library http://pspunch.com/pd/article/arduino_lib_gpsx_en.html (http://pspunch.com/pd/article/arduino_lib_gpsx_en.html) link at top

It was working yesterday and then all of the sudden today, I performed some tests with my Xbees and they're not working.
I didn't change the wiring or anything.  I have no idea what's going on.  I opened up the PS2 controller and everything looked fine.  I checked the continuity of the thin wires to make sure I didn't tear any and that was fine.  I am going to try a different Arduino tomorrow.

Any ideas to what this issue may be?

Title: Re: PS2 Arduino Problems
Post by: Mastermime on January 31, 2013, 08:24:14 PM

I figured out its the Ps2 controller