Author Topic: how to control encoder in labview  (Read 6634 times)

0 Members and 1 Guest are viewing this topic.

Offline robotaTopic starter

  • Jr. Member
  • **
  • Posts: 41
  • Helpful? 0
how to control encoder in labview
« on: February 10, 2009, 06:31:05 PM »
Hallow friends
I am new with labview
I want to learn how I control an encoder with labview
Tanks
Logged

Offline pomprocker

  • Supreme Robot
  • *****
  • Posts: 1,431
  • Helpful? 16
  • Sorry miss, I was giving myself an oil-job.
    • Nerdcore - Programming, Electronics, Mechanics
Re: how to control encoder in labview
« Reply #1 on: February 11, 2009, 11:17:28 AM »
usually encoders get hooked up with a motor and the signal goes to an MCU. I don't know of any labview compilers for an MCU.
Logged

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: how to control encoder in labview
« Reply #2 on: February 13, 2009, 01:37:29 AM »
LabView lets you hook up devices called a DAQ, of which has lots of I/O to do stuff with.

You could also just you any microcontroller and have LabView read in data that you send it. (a DAQ has a built in microcontroller)
Logged

Offline amir.ali

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Re: how to control encoder in labview
« Reply #3 on: January 02, 2010, 03:51:55 AM »
you can use the encoder with the labVIEw , through DAQ you need to use the DAQmx from the Block Diagram on the LabVIEW then choose acquiring signals, then select count edges and connect it from the DAQ...
 
Logged

Offline g44

  • Jr. Member
  • **
  • Posts: 38
  • Helpful? 0
Re: how to control encoder in labview
« Reply #4 on: January 04, 2010, 04:37:30 PM »
I search after more forums that have people that know labview
Also I search after people around all the world that teach labview
Logged

Offline g44

  • Jr. Member
  • **
  • Posts: 38
  • Helpful? 0
Re: how to control encoder in labview
« Reply #5 on: January 14, 2010, 04:59:34 PM »
I search after names of books that explain How to program things that related to robotics in labview software 
Logged
 

Get Your Ad Here

data_list