Society of Robots - Robot Forum
Mechanics and Construction => Mechanics and Construction => Topic started by: Error on March 21, 2007, 11:14:01 AM
-
I am fairly new to robotics, iv built some really easy stuff. Im in the process of making my 1st "good" robot, called the Sandwhich. has anyone heard of it or made one? just asking opinions
-
Hmm I'm not very sure what robot you're referring to, but I remember reading in a robot book about a robot that uses a sandwich box as its main chassis. Is that the robot you're talking about?
-
This? http://www.robotroom.com/Sandwich.html (http://www.robotroom.com/Sandwich.html)
-
This? http://www.robotroom.com/Sandwich.html (http://www.robotroom.com/Sandwich.html)
That is it,is it a good choice for a begginer or should i go with something else? if so what would you recommend
-
Yeah, this is a really good choice to start with :)
Happy building!
-
Yeh thats a very good robot to start out with, just one thing- if you don't have it alredy ( I'm assuming that you do) get his book Robot Building for Beginners by David Cook cause that goes into depth with step by step instruction on how to build it. Good luck with it!
-
but you have to use the wonder bread sandwich boxes...then it can be the "wonder nascar line following bot"
-
Why do u all built others robots?! I like making my own design!
-
Why do u all built others robots?! I like making my own design!
The people that aren't as good with robotics, take the electrical parts since they can't design it on their own and put it on their own body. (Or at least thats I do)
-
Why do u all built others robots?! I like making my own design!
It's a very good way to learn how to design your own robot. After you follow someone else's instructions, you get a feel for why they made the decisions they did, and maybe some ideas of what you would change. So you learn from it and can design your own robot in the future :)
In any case, it's always good to learn from what others have done and go from there..
-
Yeah but i woulden't used over 100$ for making other robots so i could learn it. I would rather buy some books and watch turtoriels on web..!
-
To each his own I guess.. $100 for a valuable learning experience, and a robot at the end of it, is pretty worth it sometimes.
Of course, reading tutorials online and watching videos help a lot, but there tends to be lots of subtle things that you don't notice until you actually build a robot on your own. Following someone else's robot helps in that regard, so you don't end up spending a couple of hundred before realizing that you missed out something important in your own design.