go away spammer

Author Topic: looking for thin wheel  (Read 7937 times)

0 Members and 1 Guest are viewing this topic.

Offline AdminTopic starter

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
looking for thin wheel
« on: February 02, 2008, 06:07:35 PM »
I am looking for a wheel with these below specs, but haven't had any luck:

less than 1" thick, prefer .5" or less

diameter more than 3.5", prefer 4" to 5"

high friction rim -> rubber, treading, etc

something like this, but with a greater diameter:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNMG5&P=7

anyone know where I can find this?

Offline Rebelgium

  • Supreme Robot
  • *****
  • Posts: 637
  • Helpful? 0
  • It's called the future ... We like it here
    • orgcrime.net
Re: looking for thin wheel
« Reply #1 on: February 02, 2008, 06:09:45 PM »
two or three CD's on top of eachother, then glue a wide rubberband around it.
The big holes in the middle might be a problem. I guess making a hub will be neccesairy.
To relax after some hard work on robotics: A very fun free online text based MMORPG
orgcrime.net

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: looking for thin wheel
« Reply #2 on: February 02, 2008, 06:30:11 PM »
exactly what i was going to say. i did that on my $50 robot

heres a pic. centering them was hard, but it's doable. i used the big servo horn as a hub. and used screws similar to the ones in the middle of the hub/horn
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: looking for thin wheel
« Reply #3 on: February 02, 2008, 07:07:44 PM »
yea the only problem i have with cds is they dont have very much friction. and even with a rubber band. and admin is the diamiter including the tire?
Howdy

Offline AdminTopic starter

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: looking for thin wheel
« Reply #4 on: February 02, 2008, 09:18:12 PM »
I'm looking for something less ghetto . . .

If I get desperate, I'll CNC some wheels and attach a rubber band around it . . . but was hoping for something already out there . . .

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: looking for thin wheel
« Reply #5 on: February 02, 2008, 09:22:18 PM »
have you looked around stores near you? i usially buy a small toy car for $3-6 and get the wheels off it.
Howdy

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: looking for thin wheel
« Reply #6 on: February 02, 2008, 09:56:51 PM »
I'm looking for something less ghetto . . .

If I get desperate, I'll CNC some wheels and attach a rubber band around it . . . but was hoping for something already out there . . .
if it's painted noone will see it.  and 5 layer 3/8" cd wheels are rock solid
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline Trumpkin

  • Supreme Robot
  • *****
  • Posts: 1,176
  • Helpful? 5
Re: looking for thin wheel
« Reply #7 on: February 02, 2008, 09:57:28 PM »
smash why do you always say "usually" but you have only built one robot?  ;D  ;)
Robots are awesome!

Offline AdminTopic starter

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: looking for thin wheel
« Reply #8 on: February 02, 2008, 11:02:55 PM »
I decided to CAD up a wheel design for CNC, just to see what it'll look like.

The weight is 1/3rd of what a foam wheel would be, and like 1/10th the weight of CD's, so I think I'll stay with my custom wheel design.

It will be on my latest robot . . .
« Last Edit: February 02, 2008, 11:40:28 PM by Admin »

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: looking for thin wheel
« Reply #9 on: February 02, 2008, 11:04:38 PM »
no well not just robots....in my metal work class we sometimes do model cars for fun and race them ;) we do all kinds of stuff (lol my teacher is crazy)
Howdy

Offline sds198

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Re: looking for thin wheel
« Reply #10 on: February 13, 2008, 03:50:07 PM »
How about these: http://www.servocity.com/html/precision_disk_wheels.html

I'm using these on a robot I'm currently building and they seem to do the job.


 


Get Your Ad Here