Electronics > Electronics
$50 Robot with AVR ISP mkII 6 pin
Webbot:
Before I started building the $50 robot I thought it would be good to have some kind of circuit diagram or at least a check list of what needs to connect to what. Mainly so I could check my soldering, volatages etc etc. So thought I would post the attached PDF document (in a ZIP file) that allows you to turn on/off layers on the board to see what's what. Old news to most - but 'may' be good news to some.
ed1380:
why havent i seen this before. this is great. IMO it should be added to the original tutorial. it would have solved so many questions on the forum
garriwilson:
No question, admin has to put this in the tutorial. This is amazing. Admin IMO you should put this in the 50$ tutorial as soon as you see this. This will be very helpful. Thank you webbot this is a great contribution.
arsenius:
Just wanted to say thank you also. This is great! Really helpful!
Maltaeron:
WOW, this is impressive, I had trouble trying to figure out what all is connected to what, and I didn't even know that this was possible in a PDF!
Navigation
[0] Message Index
[#] Next page
Go to full version