Society of Robots - Robot Forum

Mechanics and Construction => Mechanics and Construction => Topic started by: sptrks on October 06, 2011, 11:17:15 AM

Title: Dual 24V Scooter Motor chassis help.
Post by: sptrks on October 06, 2011, 11:17:15 AM

I am working on a robot that will be similar to the size of average combat robots. I am wanting this robot to have the capability of driving outside. I decided to start with the choosing the motors. The motors I chose are 24 Volt 280 W scooter motors. Here are the motors I am using : [url]http://goo.gl/yoF76]http://goo.gl/yoF76] [url]http://goo.gl/yoF76 (http://[url=http://goo.gl/yoF76)[/url].  I plan on using two of these motors to drive the robot.


My biggest problem with this project is mechanical experience. I need a lot more experience with building chassis for robots. Normally I concentrate on the electronics and programming.

So I just want some general advice and pointers on how I should approach this. Feel free to point me to relevant articles or even just give me your two cents.

Title: Re: Dual 24V Scooter Motor chassis help.
Post by: RITESH29 on October 06, 2011, 08:50:36 PM

Your url is not working.......

Title: Re: Dual 24V Scooter Motor chassis help.
Post by: Soeren on October 06, 2011, 09:49:30 PM

The link should have been: http://goo.gl/yoF76 (http://goo.gl/yoF76)
But it goes here (http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=160547332641&viewitem=&sspagename=ADME%3AL%3AOU%3AUS%3A1123&vxp=mtr)