Society of Robots - Robot Forum
Software => Software => Topic started by: mahmoud123 on May 03, 2013, 07:05:19 AM
-
hi
I am working on a project for the university that is a 40 cm by 20 cm car.. i want to use UNO board with two ultrasoinc sesnors to make the car move away when sensing a wall .. but iam not able to program. can anyone help me please ?
-
No, sorry. It is not real to think that you can build a robot with an Arduino Uno without knowing -or willing to learn- anything about programming C/C++.
Pick a different project.
Good luck.
-
http://www.newbiehack.com/MicrocontrollerTutorial.aspx (http://www.newbiehack.com/MicrocontrollerTutorial.aspx)
-
I would recommend looking through the examples at:
http://arduino.cc/en/Tutorial/HomePage (http://arduino.cc/en/Tutorial/HomePage)
these tutorials will show you what you need to do. All that needs done is to read from the sensors then adjust the speeds of the wheels to turn left and right (if that is how the car is steering).
-
Friendly guys here... ;D
-
If your using an arduino then you got learn C/C++. There are bunch C/C++ video tutorials on youtube, also the C/C++ reference page is
http://www.cplusplus.com/info/ (http://www.cplusplus.com/info/)