Author Topic: Make your own BS2  (Read 6876 times)

0 Members and 1 Guest are viewing this topic.

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
    • Robots and Circuits
Make your own BS2
« on: April 20, 2007, 04:21:31 PM »
I gust fond out that you can make you own BS2 for $15 I am trying to make the BS2SX here are the schematics for the BS2 and BS2SX.

Offline polar bear6

  • Full Member
  • ***
  • Posts: 98
  • Helpful? 0
Re: Make your own BS2
« Reply #1 on: April 25, 2007, 03:42:59 AM »
i saw this too for some time ago, but you need the PIC16C57 from Parrallax.
they have flashed/burnt/programmed it in a special and secret way.
http://www.parallax.com/detail.asp?product_id=27291
there is the kit, i dont remember if you could just by they chip, and make the rest yourself.
its only 30$, which is pretty cheap for a BS2!

Offline nanob0t

  • Robot Overlord
  • ****
  • Posts: 145
  • Helpful? 0
  • Trust Your Technolust
Re: Make your own BS2
« Reply #2 on: April 25, 2007, 09:19:54 AM »
May I ask what a BS2 is?   ???

Offline gamefreak

  • Supreme Robot
  • *****
  • Posts: 543
  • Helpful? 2
  • Robo-Enthusiast
Re: Make your own BS2
« Reply #3 on: April 25, 2007, 10:37:57 AM »
bs2= Basic Stamp 2, it is a programmable stamp made by parallax.
All hail Rodney, the holy 555 timer
And Steve said: "Let there be lead!"

Offline nanob0t

  • Robot Overlord
  • ****
  • Posts: 145
  • Helpful? 0
  • Trust Your Technolust
Re: Make your own BS2
« Reply #4 on: April 25, 2007, 10:41:41 AM »
Oh.  I should have figured that.  Hmmm, very intersting.

Thanks  ;D

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
    • Robots and Circuits
Re: Make your own BS2
« Reply #5 on: April 26, 2007, 09:26:36 AM »
there is the kit, i dont remember if you could just by they chip, and make the rest yourself.
its only 30$, which is pretty cheap for a BS2!
you can just buy the chip and you save evan more money, I made the BS2sx (normally $60.00)
for under $15.00

Offline Somchaya

  • Robot Overlord
  • ****
  • Posts: 180
  • Helpful? 0
  • You know it's cute!
Re: Make your own BS2
« Reply #6 on: April 26, 2007, 10:42:38 AM »
Hmm do you mind going into a little detail about where you got your parts, and how you did it? Under $15 seems a really good deal, so I might want to try doing that too..
Somchaya - Back after a year of misc things
http://whisker.scribblewiki.com

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
    • Robots and Circuits
Re: Make your own BS2
« Reply #7 on: April 26, 2007, 02:48:43 PM »
First off the schematic is in the first post, the three main parts you need are the interpreter chip the EEPROM and the resonator. you will also need some simple components such as resistors, transistors, and a regulator (refer to the schematic). the interpreter chip, the EEPROM, the resonator, and the regulator you can get for http://www.parallax.com/ look under OEM components (they also sell a kit but it's $30.00)  the rest you can get from any electronics company I got mine at www.jamco.com (they also mite sell the regulator and EEPROM).

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Make your own BS2
« Reply #8 on: April 29, 2007, 11:07:30 AM »
but they dont have analog to digital converters!

Quote
The BASIC Stamp’s I/O pins are perfectly suited for digital input and output with TTL/CMOS level (0 to 5 volt)
signals. However, you can use some special commands and techniques to input and output limited analog signals.
For example, the RCTIME and PWM commands can be used to read a variable resistance or output a variable
voltage from 0 to 5 volts. The I/O pins can not be used to read analog voltages by themselves, however, but this
can be done by interfacing the I/O pins to an A to D converter chip.

Offline Brandon121233

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 320
  • Helpful? 0
  • "Genius is %1 inspiration and %99 perspiration"
Re: Make your own BS2
« Reply #9 on: April 29, 2007, 04:05:00 PM »
you should look into using an Atmel AVR chip like the Atmega168, its a lot easier to work with and tons cheaper than the BS2
Hell, there are no rules here—we're
   trying to accomplish something.

                                                                              —Thomas Edison

Offline Hal9000

  • Supreme Robot
  • *****
  • Posts: 338
  • Helpful? 0
Re: Make your own BS2
« Reply #10 on: April 29, 2007, 04:31:17 PM »
I would personally try and boycott parallax as much as possible. I hate the monopoly they got. I'm also thinking that about 5 books I have are from TAB probotics, who seem to be very parallax loving. Boo.
"The truth is, you can't hide from the truth, cos the truth is all there is" - Handsome Boy Modeling School

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
    • Robots and Circuits
Re: Make your own BS2
« Reply #11 on: April 30, 2007, 08:22:16 AM »
you should look into using an Atmel AVR chip like the Atmega168, its a lot easier to work with and tons cheaper than the BS2
dose any one now ware to get and how to programme these Atmel AVR chips

Offline dunk

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 1,086
  • Helpful? 21
    • dunk's robot
Re: Make your own BS2
« Reply #12 on: April 30, 2007, 11:19:08 AM »
Quote
dose any one now ware to get and how to programme these Atmel AVR chips
have you looked at Admi's $50 robot project?
that's what he's using.
with those tutorials and a book on C you should be all set.

dunk.

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
    • Robots and Circuits
Re: Make your own BS2
« Reply #13 on: April 30, 2007, 12:00:23 PM »
Thanks :D

 


Get Your Ad Here