Society of Robots - Robot Forum
Mechanics and Construction => Mechanics and Construction => Topic started by: MangoBot on October 29, 2009, 02:17:09 PM
-
Ok, so what tools can cut aluminum, and other metals. I can think of tin snips, but only for thinner stuff. Maybe a multi-tool like the craftsman multi tool might work. So any other ideas?
-
woodworking tools.
I routinely cut 5/16" slabs of 6061 T6 with a table saw. 9" Delta bandsaw. Delta 1541 scroll saw.
-
wood qorking tools work well for aluminium.
if you are only working with smaller peices i have found my dremel incredibally useful.
-
thanks for the help guys
-
Why has no one mentioned hack saws? I love them!
Or saws in general, they might be the most used tool in my metal work today, not counting a MIG that is ;D
-
really? i didnt think a saw could cut metal?
-
Yeah, as long as its not thick as all hell.
-
I found that the big metal cutting wheels from dremel work great for aluminum. I have yet to try to plastic bits I got in the same kit. They also have some thin ones but again I have not tried them.
My latest project required a little bit of aluminum cutting. I was going to use my jig saw with a metal bit in it. But I decided to wait and use the big chop saw at work instead. Even with the jig saw it was going to be a while to cut them. 30 seconds on the chop saw and I had good clean cuts.
-
about dremel, do they make good rotary tools or is there another place that is way better
-
in my opinion dremel is one of the best you can get, and they are useful for alot of things. well worth the money.
-
about dremel, do they make good rotary tools or is there another place that is way better
Dremel are very good, if you are going to get a rotary tool, i recommend them!
-
ok, and does dremel have the ability to cut 3/8" rebar?
-
yeh, you can cut almost anything with a dremel.
metal
plastic
wood
masonary just to name a few.
-
sweet, can't wait to get one, and cut stuff
-
4KW laser.... lol Power tools are fun
-
i am afraid of lasers, one of my teeth wasn't coming in, and they hade to laser away the guns, scrape crap of the tooth, and attach it to my braces so that it woul pull down
-
that does not sound to good at all.
-
i am afraid of lasers, one of my teeth wasn't coming in, and they hade to laser away the guns, scrape crap of the tooth, and attach it to my braces so that it woul pull down
You don't know how much that made me cringe!
-
they numbed it but like a good soldering iron the heat spread
-
i am afraid of lasers, one of my teeth wasn't coming in, and they hade to laser away the guns, scrape crap of the tooth, and attach it to my braces so that it woul pull down
I have to say ouch to that, but my lasers should never be used in a mouth... no mouth would be left.
-
lol :o
-
no head would be left.
-
how much did that even cost? 4KW is kinda big
-
New near a milloin, we got it second hand for $550,000 freshly rebuilt. We never buy brand new as it is just too expensive. Better to wait 3 - 5 years for people to figure out that the salesman lied to them and 5 and 6 axis laser programming is more than pumping a model into the software. If you can't manually manipulate the program and know what your doing you wind up with really expensive crashes...lol
-
and who do you exactly work for?
-
I'm plant manager for Creative Processing Inc.
-
it's funny but for thin aluminum sheet it's often easier to use scissors then tin snips :P
-
Sissors will work on thin sheet nicely, blades are better adapted to the thin sheet than tin snips. Something I have used that works wonders on up to 1/4" is a scroll saw. Just happen to try it one day at the house because I was too lazy to come use the lasers on a sunday.
-
I've cut AL on a scroll saw and a bandsaw. I find the slower speeds work best.
WD40 works as a good cutting fluid even when using a hack saw.
-
A power miter saw for wood works great on aluminum if you have a carbide tipped blade with a fairly fine tooth count. Make sure to release the trigger & let the blade stop before raising the saw. A small piece of "fall off" can be like a bullit.
A plain old hacksaw in a miter box works ok but the blade can tend to "walk" a little. You can then use most any type of sander to square up the cuts.
Please be safe
-
If you want to cut thick aluminum fast and cleanly then you need to get a Sawzall Saw. these small electric handheld things are powerful. i once had a friend who literally gutted a washing machine into pieces, and sawed the motor in half! :o you can find one on ebay for around 75.00 dollars. although if you don't have to saw a house in half afterwards i would just settle with a hacksaw or a dremmel.