go away spammer

Author Topic: Which Resister for Photosensor?  (Read 1401 times)

0 Members and 1 Guest are viewing this topic.

Offline jaabotTopic starter

  • Full Member
  • ***
  • Posts: 52
  • Helpful? 0
Which Resister for Photosensor?
« on: May 14, 2009, 08:23:17 PM »
Just about finished with the $50 robot. I have a question about the photosensors.

I cannot tell from the instructions which resistor to use: the 1.62 K OHM or the 340 OHM? Can anyone tell me?

Also, I am using the medium sized photoresisters from the Radioshack pack. Is this OK? Thanks. 
Logged

Offline MarkBrown

  • Full Member
  • ***
  • Posts: 77
  • Helpful? 0
    • Mark's Projects
Re: Which Resister for Photosensor?
« Reply #1 on: May 14, 2009, 11:25:51 PM »
In the tutorial, Admin says he used a 1.5k ohm resistor with the medium size photo sensor.  I used the 1.62k ohm resister with each photo sensor  since the 340 ohm was used for the LED on the board.
Logged
It is human nature to confuse genious with insanity

http://marksproject.blogspot.com/

Offline jaabotTopic starter

  • Full Member
  • ***
  • Posts: 52
  • Helpful? 0
Re: Which Resister for Photosensor?
« Reply #2 on: May 15, 2009, 07:47:30 AM »
Thanks very much. I must have missed that.
Logged
 

Get Your Ad Here