Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: galannthegreat on February 07, 2009, 03:07:56 PM

Title: SN754410 help
Post by: galannthegreat on February 07, 2009, 03:07:56 PM

I need to know if I can tie the enable pins on the SN754410 motor driver to Vdd. I am wondering is this ok? Will it cause problems?

Title: Re: SN754410 help
Post by: Razor Concepts on February 07, 2009, 03:25:54 PM

It will be fine as long as Vdd is at 5v (pin 16)