Author Topic: Alternate for Hitec HS-311 servo  (Read 4067 times)

0 Members and 1 Guest are viewing this topic.

Offline junkmanTopic starter

  • Jr. Member
  • **
  • Posts: 14
  • Helpful? 0
Alternate for Hitec HS-311 servo
« on: February 17, 2011, 03:42:24 AM »
I got all the parts for 50$ robot.Only my local dealers don't have and servos from Hitec
They catalog is online at http://www.vegarobokit.com/category.aspx?category_id=41 and http://www.servoelectronics.co.in/PHONES.html

can youl suggest alternate motor or servo
or tell me what specs to look for so i can complete 50$ robot
(buying parts local to keep cost low)

Offline rbtying

  • Supreme Robot
  • *****
  • Posts: 452
  • Helpful? 31
Re: Alternate for Hitec HS-311 servo
« Reply #1 on: February 17, 2011, 09:10:49 AM »
This looks like the standard HS-311:
http://www.vegarobokit.com/product_descriptions.aspx?product_id=59&sub_category_name=Servo%20Motors&category_id=41

It's probably a clone of it, and shouldn't be too hard to modify.

For the $50.00 robot, you need two SERVOS (not motors - there's no motor driver on the $50.00 robot) with a large enough torque to move your robot (probably in the 1.0kg-cm to 4kg-cm range)

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Alternate for Hitec HS-311 servo
« Reply #2 on: February 17, 2011, 06:21:56 PM »
Hi,

or tell me what specs to look for so i can complete 50$ robot
You have already been pointed to a clone of the HS-311, but you can look for yourself in the Servo Data Base the next time you need specifics on a servo.
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

Offline raptorwes

  • Jr. Member
  • **
  • Posts: 43
  • Helpful? 0
Re: Alternate for Hitec HS-311 servo
« Reply #3 on: February 17, 2011, 06:32:35 PM »
i just picked up 2 HItec HSR-1425cr servos from Hobby horse for about 17.00 EA + shipping. They are continues rotation so they don't have to be modified to be used as wheel motors(if that is what you were going to do with them).

 The specs on the package are :

Operating voltage : 4.8 to 6.0 v
Operating speed : 43.4 rpm+10%
Output torque: 38.88oz-in


***I in no way have any affiliation with the hobby shop mentioned above ***

Offline junkmanTopic starter

  • Jr. Member
  • **
  • Posts: 14
  • Helpful? 0
Re: Alternate for Hitec HS-311 servo
« Reply #4 on: February 20, 2011, 11:47:59 PM »
thanks guys :D

Offline tamarab

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Re: Alternate for Hitec HS-311 servo
« Reply #5 on: July 22, 2013, 05:27:32 AM »
I highly recommend servotronix servo drives:
http://www.servotronix.com/servo-drives.html
and servo motors:
http://www.servotronix.com/servomotors.html

 


Get Your Ad Here

data_list